Recessed housing rated IC or Non-IC. For remodel construction only. Approved for factory assembled wiring only. Approved for direct burial in insulation. Air-tight standard. Tested to meet current energy codes. Aluminum foam-gasketed housing with three remodel clips for installation in existing plaster, sheet rock or mechanical ceilings. Heavy-gauge galvanized steel raceway arm. Galvanized steel junction box with four built-in romex clamps, five 1/2 knockouts with slots for pryout. Not suitable for pulling wires. Maximum 4 (2 in, 2 out) No. 12 AWG conductors. Rated for 90° C. Ground wire provided. Removable J-box door for easy access. Trim retention (TOR): Two-side mounted torsion springs on the trim and 2 receiving brackets in the can ensure a consistently tight fit with the ceiling. Quick disconnect provided for connection of Reality module. Paint overspray masked by disposable disconnect plug. Housing and Reality combination is IC rated and thermally protected. 120 volts only. Air-tight housing suitable for air-tight installations. Refer to energy codes for proper installations. 2 x 8 existing ceiling or T-bar ceiling panel installation. Clip adjustment on housing (up to 1-1/4”) allows for flush mounting with ceiling face. UL Listed to US and Canadian safety standards. Wet location listed; Title 24 compliant.